Product For Futher Details Contact : - technocrafts666@yahoo.co.in, technocrafts@vsnl.com, technocrafts333@vsnl.net  
 

Model ALPI DECA A2 - Version 1000-1500

 
 
CUTTING/PUNCHING MACHINE MODEL ALPI DECA A2 VERSION 1000/1500
 

ALPI-DECA is a CNC machine specially designed for cutting, punching and stamping sheet directly from coils.
ALPI-DECA is the most flexible and productive machine available today on the market.
The ALPI-DECA machine can replace the traditional punching machines, cutting lines, plasma cutting machines, morever starting from coil there is no need to cut-to-length the sheet and to load or unload the sheet
before the processing, all is done by this machine in automatic.
The two rolating units multi-tools of version A2 can hold up to 20 tools station A (diameter 12,7 mm), station B
(diameter 31.75mm), Station C (diameter 50,8mm).
The CNC rotation of the units allows an automatic and very fast change of the working tool.
Each of the twenty tools has the possibility to rotate of 360 , the rotation is CNC controlled. The vertical run of
the hammer of the hydraulic heads is CNC controlled.
The interpolation of the machine movements, such as the CNC controlled longitudinal strip movement, the
CNC controlled transversal units movement, the CNC controlled 360 heads rotation and the CNC controlled
run of the vertical run of the vertical run of the hammer position allows the execution of any shape or geometrical figure.
Using special deformation tools it is possible to mark the pieces, to make drawn pieces, to form ribs and small borders, it is also possible to trace references for folds.
The ALPI-DECA machine can process every metal as for example steel, stainless steel, copper, aluminium and also non-metal materials such as PVC, nylon, Teflon and others.
The ALPI-DECA A2 machine can be supplied in two versions : ALPIDECA A2 1000 and ALPI-DECA 1500, A2
for a coil width of 1000 mm or 1500 mm.
All the works are executed using mechanical tools only and therefore there is no damage on the surface of the
sheet in case of coated surfaces, delicate surfaces or protective films.
The production process is environmentally clean, there is no production of smoke or incandescent slag.
Changing the punches and dies is also a very easy and fast operation, the operation takes no more than two
minutes.
When the sheet is inseted into the machine CNC electronic roll-feeding system the operator has to choose the
desiderate program, press start button and the machine starts the working cycle all in automatic included the
off load of the ready part.

   
 
ESA SERIES - VERSION 1000/1500
CUTTING/PUNCHING MACHINE MODEL ALPI ESA SERIES
 
 
 

ALPI-ESA is a CNC machine specially designed for cutting, punching and stamping sheet directly from coils.
ALPI-ESA is the most flexible and productive machine available today on the market.
The ALPI-ESA machine can replace the traditional punching machines, cutting lines, plasma cutting machines, morever starting from coil there is no need to cut-to-length the sheet and to load or unload or unload the sheet
before the processing, all is done by this machine in automatic.
The ESA rotating head can hold up to 6 tools station A (diameter 12,7mm and station AM (diameter 22 mm). The CNC rotation of the head allows an automatic and very fast change of the working tool, less than a second
Each of the ten tools has the possibility to rotate of 360, the rotation is CNC controlled. The vertical run of the
hammer of the hydraulic head is CNC controlled.
The interpolation of the machine movements, such as the CNC controlled longitudinal strip movement, the CNC controlled transversal head movement, the CNC controlled 360 head rotation and the CNC controlled run
of the vertical run of the hammer position allows the execution of any shape or geometrical figure.
Using special deformation tools it is possible to mark the pieces, to make drawn pieces, to form ribs and small borders, it is also possible to trace references for folds.
The ALPI-ESA machine can process every metal as for example steel, stainless steel, copper, aluminium and also non-metal materials such as PVC, nylon, Teflon and others.
The ALPI-ESA machine can be supplied in two versions ALPI-ESA 1000 and ALPI-ESA 1500, for a coil width of
1000mm or 1500 mm:
All the works are executed using mechanical tools only and therefore there is no damage on the surface of the
sheet in case of coated surfaces, delicate surfaces or protective films. The production process is environmentally clean, there is no production of smoke or incandescent slag.
Changing the punhes and dies is also a very easy and fast operation, the operation takes no more than two minutes.
When the sheet is inserted into the machine CNC electronic roll-feeding system the operator has to choose the desiderate program, press start button and the machine starts the working cycle all in automatic included
the off load of the ready part.

 
 
DECA A1   DECA A1 WITH SHEAR
 
 
DECA A2
with slitter and hydraulic shear
  DECA A2
 
WORKING FROM COIL GIVES ADVANTAGES WITHOUT ANY OPERATOR
ALPI Esa   4 Tons to work on little thickness materials Smallest Punching Line From Coil
 
ALPI Esa, with 4 Tonage of pressing power, is the smallest of Produtech punching lines from coil.


• High productivity
• No limit along the length
• Perfect management of the material
• Absolute precision
• Suitable for every production
• Continuous production
• Automatic download
 
 
ALPI Deca, with 10 Tonage of pressing power, is the intermediate model of Produtech punching lines from coil.   ALPI Deca
 
ALPI Deca, with 10 Tonage of pressing power,
is the intermediate model of Produtech punching lines from coil.


Thanks to the high flexibility these lines can be installed in many different fields such as air treatment, roofs and walls production, automotive, silos and metallic
structures building, light carpentry, electrical
boxes, metallic furniture, perforated sheets and many other products.
 
 
ALPI Venti   20 Tons to punch also on high thickness
materials Top Model Punching Line From Coil
 
ALPI Venti, with 20 Tonage of pressing power, is the top model of Produtech punching lines from coil.


Thanks to the punching tools it is possible to cut every kind of holes, oblongs or notching with little
or big dimensions. The high precision in the manage of the hammer allows to the punching
machine to work also with rolling shears or deformation tool in an optimunm way.
 
Fiber laser technology to cut directly from coil
  ISEO Laser
 


ISEO laser collects Produtech’s know how, experienced thanks to the punching lines production, about producing parts directly
from coil.

No maintenance
Fiber laser is not asking for an optical path to transport the laser beam, so there is
no need of focal lenses that could damage or
deteriorate. This means no maintenance costs.

For Futher Details Contact : - technocrafts666@yahoo.co.in, technocrafts@vsnl.com, technocrafts333@vsnl.net